10-28-2021 03:39 AM
Hi everyone,
after an unsuccsessful firmware update attempt (via the WebUI) yesterday, I managed to reflash the firmware via Xmodem and got the switch back running, however the WebUI doesn't work properly yet.
After my first boot attempt I had the .bin in the root directory of flash, which led to a generic webUI with terminal input and stuff. So I realized the firmware image should be in the corresponding directory (with the html directory and so on), so I copied the .bin into thhat folder. Now if I try to access WebUI I get the password request but after entering I see the loading ajax but after that the page stays blank (no error, the page is loaded as I can see with the browser developer tools).
Before the firmware crash the firmware worked just fine, so I doubt that the problem is in the conf.
Best regards,
Dominik
Solved! Go to Solution.
10-28-2021 03:57 AM
Hi there,
If you are using the webGUI then you need the .tar system image file, not just the .bin file. Either copy of the .tar file to flash or extract it from a remote server using the archive command, eg:
archive download-sw tftp://192.168.1.1/c3560cx-universalk9-tar.152-7.E3.tar
This will create the correct directory structure and contents for the release.
cheers,
Seb.
10-28-2021 04:01 AM
With your approach, the bin-version and the UI don't match any more. Best to do a new upgrade with the tar-file from the command line:
archive dl-software tftp://the-tar-file-for-the-switch
10-28-2021 03:57 AM
Hi there,
If you are using the webGUI then you need the .tar system image file, not just the .bin file. Either copy of the .tar file to flash or extract it from a remote server using the archive command, eg:
archive download-sw tftp://192.168.1.1/c3560cx-universalk9-tar.152-7.E3.tar
This will create the correct directory structure and contents for the release.
cheers,
Seb.
10-28-2021 04:01 AM
With your approach, the bin-version and the UI don't match any more. Best to do a new upgrade with the tar-file from the command line:
archive dl-software tftp://the-tar-file-for-the-switch
10-28-2021 06:24 AM
@Karsten Iwen @Seb Rupik Thanks guys, I will try that right now and probably solve the problem.
10-28-2021 07:22 AM
She's back, thanks guys!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide