C3750 - trying to get POE to work

[00u1e51hfxhmUTncT5d7]

i have a c3750

i am able to access Console 

i dont know how to program it to allow POE to work

basically if i go

MODEM (ethernet) COMPUTER - works
if i go 
MODEM (ethernet) SWITCH (ethernet) COMPUTER - does not work

i need to activate the POE ports on the back

also i need to set password/login as i plan to use there for my camera system

[balaji.bandi]

what is the Full Model  of the device,

post below information to help further :

show version

show power inline

show inventory

[Seb Rupik]

Hi there,

What model 3750 are you using? What is the output of sh inv on the device?

Typically only models with a P or U suffixed after the port number support POE.

Based on my understanding of your message, 'POE pass through' is not supported.

cheers,

Seb.

[Leo Laohoo]

Only if the model supports PoE.  

[00u1e51hfxhmUTncT5d7]

WS-C3750X-48P-L V02 is the product id
is that what your after 

[Leo Laohoo]

---

@00u1e51hfxhmUTncT5d7 wrote:

i need to activate the POE ports on the back

---

What do you mean "on the back"?  
The ports at the back of a 3750X is for console and a Management Port.  The Management Port does not support PoE.

[00u1e51hfxhmUTncT5d7]

these are not POE ports?

[00u1e51hfxhmUTncT5d7]

maybe i bought the wrong thing here, i thought this could be used as a POE SWITCH
so i can run the IP cameras directly to my PC as my current NVR only supports swann cameras and i got bunch from different supplier i want to use 

[Leo Laohoo]

What is the exact model of the switch?