05-22-2012 12:06 AM - edited 03-07-2019 06:49 AM
We have two c4500 with above characteristics.
The cpu usage is even more higher when I apply a voice ACL on the on of the switches, more than other.
The peak is at Lopri processes.
I attached the show procc cpu and sh platform health.
When I apply a ACL the cpu utilization is 90%.
In my show log I have detected only one error duplex mismatch. The network is operating normally now, but I disabled the ACL on the other switch because than the CPU spikes. The same ACL is working fine on the other switch.
Thanks in advance.
05-22-2012 02:20 AM
05-24-2012 06:09 AM
The proccess K2CpuMan has greatly devolved to a normal stage when I typed in the comand:
no ip unreachables on voice vlan interface
I am reading now on what are the side effects of this command.
This command stopped sending back to the cpu ICMP packets for the denied packets in the ACL.
That used a lot of cpu utilization.
Any suggestion is much appreaciated.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide