07-28-2017 11:28 AM - edited 03-08-2019 11:31 AM
Hello,
We have a Catalyst 6509 ( WS-6509-E) with WS-SUP720-3B supervisor engine. I want to know if C6800-16P10G is supported on this chassis.
Could someone please able to help to confirm.
Thank you very much!
Solved! Go to Solution.
07-28-2017 11:32 AM
The chassis yes but the supervisor no -
Jon
07-28-2017 11:32 AM
The chassis yes but the supervisor no -
Jon
07-28-2017 11:46 AM
Thanks Jon
So I can order WS-X6708-10GE that supports our supervisor engine?
07-28-2017 11:57 AM
Yes, that would work with your supervisor.
There is a 16 port module as well but obviously there would be more oversubscription which you may not want.
You also need to check software needed, enough power etc.
Jon
07-28-2017 12:06 PM
Hi Jon
Yes, we 921.90 Watts available power.
Just a last query here, does WS-X4712-SFP+E supports SFP-10G-SR= ?
Thanks
07-28-2017 12:19 PM
Can't say for sure as haven't done that sort of thing for a while.
Hopefully someone else will answer or you could open a separate thread for that question.
Jon
07-28-2017 12:32 PM
Hi,
Just a last query here, does WS-X4712-SFP+E supports SFP-10G-SR= ?
The module supports both 10Gig SR and 10Gig LR. So, it all depends on the SFP+ (MM or SM) you put in there.
Does this answer your question?
HTH
07-29-2017 07:30 AM
Thanks Reza and Jon
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide