11-04-2014 06:39 PM - edited 03-07-2019 09:22 PM
Hello. : )
One question.
Can i run routing protocol such as ospf, bgp, eigrp with only F2 modules? (no M linecard)
Thank you in advance : )
Solved! Go to Solution.
11-04-2014 07:01 PM
Hi,
Yes, you can use OSPF, EIGRP, IS-IS, etc...
see link below for more info:
http://www.cisco.com/c/dam/en/us/products/collateral/switches/nexus-7000-series-switches/at_a_glance_c45-689339.pdf
HTH
11-04-2014 07:01 PM
Hi,
Yes, you can use OSPF, EIGRP, IS-IS, etc...
see link below for more info:
http://www.cisco.com/c/dam/en/us/products/collateral/switches/nexus-7000-series-switches/at_a_glance_c45-689339.pdf
HTH
11-04-2014 07:54 PM
Thank you : )
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide