Can't Access Web Gui on Cisco 892FSP Router

[rocky99]

Hi,

I'm having trouble getting to the actual Web Gui of the Cisco 892FSP (C892FSP-K9) Router running ios version 15.x. I did enable the http server from the terminal but I could only reach a very basic text only page as shown below. I certainly hope this is not the only gui on this router.

Any help will be appreciated.

[balaji.bandi]

Can you post show version and  #dir (or post here)

What web-based or GUI tool is available for the
900 Series ISRs?
You can configure and manage the 900 Series ISRs with Cisco
Configuration Professional.

[rocky99]

Thank you. Here's the output of dir command

Directory of flash:/

1 -rw- 95468120 Aug 6 2019 00:01:08 +00:00 c800-universalk9-mz.SPA.157-3.M.bin
2 -rw- 34 Aug 6 2019 00:16:42 +00:00 pnp-tech-time
3 -rw- 34321 Aug 6 2019 00:16:46 +00:00 pnp-tech-discovery-summary
4 drw- 0 Aug 6 2019 00:07:38 +00:00 managed
14 drw- 0 Aug 6 2019 00:07:38 +00:00 eem

256503808 bytes total (160866304 bytes free)

I also tried to download Cisco Configuration Express to load it onto the Router Flash as per this article, but the download URL is dead. How do I download CCP Express in this case?

Cisco.com | Installing CCP Express 

[Flavio Miranda]

Hello

 Try to use this Cisco tool:

https://www.cisco.com/c/en/us/products/cloud-systems-management/router-web-setup-tool/index.html 

[rocky99]

Thank you. I tried it and found that this is a very old tool and doesn't support the 892 Router.

I tried downloading Cisco Configuration Express to load it onto the Router Flash as per this article, but the download URL is dead. How do I download CCP Express in this case?

Cisco.com | Installing_ccp_express_adminview.html 

[Kasun Bandara]

CCP is not available to download now in cisco site. you can download from 3rd party site (make sure check for malware and phishing) then try installing according to installation guide. file name is cisco-config-pro-exp-admin-k9-3_5_4-en.zip

[rocky99]

Thank you. I did download that file from a third party, but as you know there is NO way to be sure if it hasn't been tampered with since the file did not come from the official source. Now I've a brand new Router for which Cisco is not providing the required software which should've been part of the product anyways, yet still redirecting people to dead links in their tutorials.

You shouldn't even suggest downloading essential software from third party because that's just messed up and puts their network at risk. Please let me know if anyone can provide that file via Cisco or this Router is going in Trash.

[rocky99]

Would anyone be able to reach out to the Product Management and provide that file hosted on Cisco owned servers?