cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

2462
Views
30
Helpful
3
Replies
Highlighted
Beginner

Can't tell if a 2960X has a stack module installed.

I'm trying to determine if several C2960X switches we own have stack modules installed.  When I do a show inventory the module is not called out.  I can't find a way to tell if a switch has a module installed without physically looking at the switch.  Anyone have an idea?

 

I'm pretty sure that site1 does NOT have a stack module installed:

site1#sh inve
NAME: "1", DESCR: "WS-C2960X-24PS-L"
PID: WS-C2960X-24PS-L  , VID: V01  , SN: ZZZZZZZZZZZ

NAME: "GigabitEthernet1/0/25", DESCR: "1000BaseLX SFP"
PID: GLC-LH-SMD          , VID: V01  , SN: ZZZZZZZZZZZ


site1#sh swit detail
Switch/Stack Mac Address : 0000.0000.0000
                                           H/W   Current
Switch#  Role   Mac Address     Priority Version  State
----------------------------------------------------------
*1       Master 0000.0000.0000     1      4       Ready               

 

         Stack Port Status             Neighbors     
Switch#  Port 1     Port 2           Port 1   Port 2
--------------------------------------------------------
  1       Down       Down             None     None

site1#

 

I pretty sure that site2 DOES have a stack module installed:

site2#sh inv
NAME: "1", DESCR: "WS-C2960X-48FPS-L"
PID: WS-C2960X-48FPS-L , VID: V01  , SN: ZZZZZZZZZZZ


site2#sh swit det
Switch/Stack Mac Address : 0000.0000.0000
                                           H/W   Current
Switch#  Role   Mac Address     Priority Version  State
----------------------------------------------------------
*1       Master 0000.0000.0000     1      4       Ready               

 

         Stack Port Status             Neighbors     
Switch#  Port 1     Port 2           Port 1   Port 2
--------------------------------------------------------
  1       Down       Down             None     None

site2#

Everyone's tags (1)
1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Hall of Fame Expert

Try:sh platform statusHTH

Try:

sh platform status

HTH

View solution in original post

3 REPLIES 3
Highlighted
Hall of Fame Expert

Try:sh platform statusHTH

Try:

sh platform status

HTH

View solution in original post

Highlighted
Beginner

Yep, that does it. Thanks!!! 

Yep, that does it. 

Thanks!!!

 

 

Highlighted
Beginner

A little further explanation

A little further explanation on what you can expect to see:

Without a stacking module inserted:

Switch#show platform status
Status: Normal

With a stacking module inserted:

Switch#show platform status
Status: Normal
FlexStack Module Status: Normal

CreatePlease to create content
Content for Community-Ad