Can the C9300-24S have 10G SFP+ and LC multimode?

[AK72495]

Can the C9300-24S support 10G SFP+ and LC multimode fiber? The spec sheet is confusing listing only 1G SFP. The project I'm working on needs mostly 1G but some connections need to have 10G. We are going to use at least 10 ports.

[Reza Sharifi · Accepted solution]

Hi,

That switch only takes 1Gig SFP and not 10Gig. So, all 24 ports are 1Gig. The 1Gig SFPs can be multimode or single-mode The uplink module can be 1 or 10Gig.

Datasheet:

https://www.cisco.com/c/en/us/products/collateral/switches/catalyst-9300-series-switches/nb-06-cat9300-ser-data-sheet-cte-en.html

HTH

[Leo Laohoo]

Yes and no. 

C9300-24S does not support SFP+, however, the C9300-NM-8X module (which works with the C9300-24S) can support up to 8 x SFP+.

[balaji.bandi]

C9300-24S - only support uplink module SFP+ rest all ports SFP only.

make sure you prepare to run IOS XE 16.12.X (it can not take less than this version) - if you looking to stack with any other old Cat 9300, they need to bring forward to meet this version to make as stack.