Can the C9300-NM-4M module provide POE on a 9300 POE switch ?

[cegsm]

Hi all

We are considering buying Cisco C9300-48P-E switches and want to connect Meraki CW9166 access points to them.

These access points have a 5Gbps Multigabit port but the switches are only 1Gbps so we would need to install some C9300-NM-4M MutilGigabit modules in the switches

Can anyone confirm for certain if these modules would provide PoE if installed on a POE switch ?

Thanks

[balaji.bandi · Accepted solution]

Can anyone confirm for certain if these modules would provide PoE if installed on a POE switch ?

Uplink Module does not provice PoE.

If you looking Multi-Gig - Look for Cat 9300 UXM which have Multi-Gig ports.

[M02@rt37 · Accepted solution]

Hello @cegsm,

C9300-NM-4M module doesn't support PoE.

https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/hardware/install/b_c9300_hig/b_c9300_hig_chapter_01001.html#concept_133C16586B5446C8A33F71FA5241BD23

https://www.cisco.com/c/en/us/products/collateral/switches/catalyst-9300-series-switches/nb-06-cat9300-ser-data-sheet-cte-en.html#Platformdetails

Since module are for Uplinks, no PoE with these modules.

[cegsm]

Thanks all

[M02@rt37]

You're very welcome @cegsm.