cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2469
Views
0
Helpful
1
Replies

cannot console into 3750-X Stack member

markschnabel
Level 4
Level 4

                   I have 2 3750-x members in a stack running 12.2(58)SE2. I am able to console into the stack master, which happens to be the top switch, but not able to console into the 2nd member. I get the screen stating the console is available but never get the prompt to login. Is this expected behavior?

On our stacks of 3750v2's, I'm able to console to any switch in the stack

Thanks in advance

1 Reply 1

Reza Sharifi
Hall of Fame
Hall of Fame

You should be able to console to the members too:

Connectivity to the Switch Stack Through Console Ports or Ethernet Management Ports

You can connect to the stack master by using one of these methods:

You can connect a terminal or a PC to the stack master through the console port of one or more stack members.

http://www.cisco.com/en/US/docs/switches/lan/catalyst3750x_3560x/software/release/12.2_55_se/configuration/guide/swstack.html#wp1170757

HTH

Review Cisco Networking products for a $25 gift card