11-09-2020 11:45 PM
Hello everyone,
I just finished my MPLS configuration but I have one last roadblock.
I can reach my HQ LAN(10.10.1.0/24) from my branch but HQ cannot reach branch LAN(10.10.3.0/24).
This happened after I did NAT outside and NAT inside on the branch router.
I can reach the interface facing outside but cannot reach the interface facing the LAN
=================================================================================
no ip source-route
!
!
ip dhcp relay information option
ip dhcp relay information trust-all
ip dhcp excluded-address 10.10.3.253
ip dhcp excluded-address 10.10.3.252
ip dhcp excluded-address 10.10.3.1 10.10.3.50
!
ip dhcp pool KITWE-POOL
network 10.10.3.0 255.255.255.0
default-router 10.10.3.3
dns-server 10.10.1.4
!
!
ip cef
no ip domain lookup
ip name-server 8.8.8.8
no ipv6 cef
!
!
multilink bundle-name authenticated
!
!
interface Loopback0
ip address 3.3.3.3 255.255.255.255
!
!
interface FastEthernet0
switchport access vlan 10
!
!
interface FastEthernet1
switchport access vlan 10
!
!
interface FastEthernet2
switchport access vlan 10
!
!
interface FastEthernet3
switchport access vlan 10
!
interface FastEthernet6
!
!
interface FastEthernet7
!
!
interface FastEthernet8
ip dhcp relay information option-insert
ip address 192.168.124.10 255.255.255.252
ip directed-broadcast
ip nat outside
ip virtual-reassembly
duplex auto
speed auto
!
!
interface GigabitEthernet0
description Internet
no ip address
ip virtual-reassembly
shutdown
duplex auto
speed auto
!
!
interface Vlan1
no ip address
shutdown
!
!
interface Vlan10
ip dhcp relay information option-insert
ip address 10.10.3.3 255.255.255.0
ip helper-address 10.10.3.3
ip directed-broadcast
ip nat inside
ip virtual-reassembly
!
!
interface Async1
no ip address
encapsulation slip
!
!
ip forward-protocol nd
ip forward-protocol udp talk
no ip http server
no ip http secure-server
!
!
ip nat inside source list 113 interface FastEthernet8 overload
ip nat outside source static 10.10.1.0 10.10.3.3
ip nat outside source static 192.168.124.2 192.168.124.10
ip route 0.0.0.0 0.0.0.0 192.168.124.1 2
ip route 0.0.0.0 0.0.0.0 192.168.124.2 5
ip route 10.10.1.0 255.255.255.0 192.168.124.9
ip route 10.10.1.0 255.255.255.0 192.168.124.2 3
ip route 10.10.2.0 255.255.255.0 192.168.124.9
ip route 192.168.124.0 255.255.255.252 192.168.124.9
ip route 192.168.124.0 255.255.255.252 FastEthernet8 3
!
access-list 113 deny ip 10.10.3.0 0.0.0.255 10.10.1.0 0.0.0.255
access-list 113 permit ip 10.10.3.0 0.0.0.255 any
access-list 113 deny ip 10.10.1.0 0.0.0.255 any
=======================================================================
Any assistance will be highly appreciated.
11-09-2020 11:54 PM
Please post this homework/schoolwork in the Cisco Learning Network.
11-10-2020 01:43 AM
Hi @Leo Laohoo ,
thanks for the suggestion.
Fortunately, it's real life, the image is just a network map.
@Georg Pauwen , it is not a packet tracer project. I just used PT to draw my network map. the issue is on the router configurations.
11-10-2020 12:08 AM
Hello,
post the zipped Packet Tracer project (.pkt) file...
11-11-2020 12:42 AM
Hi,
Do you have a solution in mind?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide