cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Community Helping Community

979
Views
0
Helpful
1
Replies
Highlighted

Cannot Redistributing Direct,EIGRP and OSPF on Nexus 7000

Hi, i have a problem on redistributing OSPF,EIGRP & Direct connected on my Nexus 7000. Here is My topology

 

LAN--------N7k Vdc 1 (OSPF)---------------(OSPF)n7k vdc 2(EIGRP) -----------------------(EIGRP)Router ------WAN

 

I dont know if there s a problem on my route map, in each of those device are not accepting routing from redistribution.

i want on VDC 1 its should have a routing table from VDC 2 and Router antind VDC 2 and Router should have all the device routing table.te

Note:

- Router is a Vendor Device,dont have the configuration.

- the EIGRP and the and OSPF are running well.

- VDC 1 have ospf table from VDC 2,but not learn EIGRP table from Router

- VDC 2 have ospf table from VDC 1 & have EIGRP table from Router

- Router not learn any ospf table from VDC 2 and 1

 

Here s my Configuration:

 

VDC 1

 

ip prefix-list 10 seq 5 permit 10.49.0.0/16
ip prefix-list 10 seq 10 permit 10.53.0.0/16
ip prefix-list 10 seq 20 permit 172.16.10.0/24
route-map OSPF_redist permit 10
  match ip address prefix-list 10
 

 

------------- Some of Vlan----------

interface Vlan3
  no shutdown
  ip address 10.5x.x.1/26
  ip router ospf 1 area 0.0.0.0

interface Vlan4
  no shutdown
  ip address 10.5x.x.129/26
  ip router ospf 1 area 0.0.0.0

interface Vlan5
  no shutdown
  ip address 10.5x.x.33/26
  ip router ospf 1 area 0.0.0.0

  interface port-channel1
  description "Connect to VDC 2"
  ip address 10.5x.x.41/30
  ip router ospf 1 area 0.0.0.0

router ospf 1
  router-id 10.6x.x.69
  default-information originate always
  redistribute direct route-map OSPF_redist
  redistribute static route-map OSPF_redist
  default-metric 1

 

VDC 2

ip prefix-list 10 seq 5 permit 10.4x.0.0/16
ip prefix-list 10 seq 10 permit 10.5x.0.0/16
ip prefix-list 10 seq 20 permit 172.1x.10.0/24
route-map OSPF_redist permit 10
  match ip address prefix-list 10
 

interface port-channel3
  description "Connect to VDC 1
  ip address 10.5x.x.33/30
  ip router ospf 1 area 0.0.0.

interface Ethernet2/43
  description "Connect to Router G0/0"
  ip address 10.49.3.74/29
  ip router eigrp 500
  no shutdown

  router eigrp 500
  router-id 10.x.x.67
  default-metric 1000000 1 255 1 1500
  redistribute direct route-map OSPF_redist
   redistribute ospf 1 route-map OSPF_redist
router ospf 1
  router-id 10.x.x.67
  default-information originate always
  redistribute direct route-map OSPF_redist
  default-metric 1
  redistribute eigrp 800 route-map OSPF_redist

Did i miss something,even i cant redistribute direct connect to each device.

 

 

 

 

 

 


 

1 REPLY 1
Beginner

 Hi ,As per my observation

 

Hi ,

As per my observation ,your prefix list seems to be wrong,

 

example ip prefix-list 10 seq 5 permit 10.49.0.0/16

this will redistribute only 10.49.0.0/16 specific subnet like it will not redistribute 10.49.1.1/32 or 10.49.2.0/24 

you need to mentioned ge or le words to specify subnet mast.

Regards,

Ashish

 

 

CreatePlease to create content
Content for Community-Ad