10-08-2019 02:58 AM
Hi,
Im using a cisco managed switch to access CLI to practice for my CCNA course, had a password configured and think I failed login a few times and one time it blocked me out. But now it just says "Network error: Permission denied".
For the record, I had accessed the CLI before and it was working fine (via SSH)
Any idea what I can do to fix this?
details:
Cisco SG300-10 10 port managed switch (connecting to work laptop via ethernet port)
Solved! Go to Solution.
10-08-2019 04:27 AM
Hi @Pabsgc
There are commands that block access after somes failed attempts.
If you can access after restarting the switch, attach the settings to check.
Regards
10-08-2019 05:49 AM
Hi @Pabsgc ,
Check this link:
http://www.thetechfactors.com/reset-cisco-sg300-switch-factory-default/
Regards
10-08-2019 03:35 AM
Hello,
try and reboot both the switch and the laptop...
10-08-2019 04:49 AM
Thanks for your reply
Managed to get in but the password needs to be reset, any easy way to do this?
10-08-2019 05:49 AM
Hi @Pabsgc ,
Check this link:
http://www.thetechfactors.com/reset-cisco-sg300-switch-factory-default/
Regards
10-08-2019 04:27 AM
Hi @Pabsgc
There are commands that block access after somes failed attempts.
If you can access after restarting the switch, attach the settings to check.
Regards
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide