06-20-2010 12:02 PM - edited 03-06-2019 11:40 AM
Hello,
How many SVI (Switched Virtual Interfaces) it's possible to configure on Supervisor 6-E and 6L-E with LAN Base software?
Please confirm me with a link to the appropriate site on cisco.com. Feature navigator do not show this information.
Kamil
06-20-2010 08:12 PM
Why you need more than one SVI on a LAN Based image? SVI is L3 interface for inter-VLAN routing.
BTW, the follow link clearly said SUP 6L-E supports 2048 SVI's and SUP 6-E supports 4096 SVI's.
http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps4324/data_sheet_c78-530856.html
Regards,
jerry
06-21-2010 12:52 AM
Why you need more than one SVI on a LAN Based image?
The answer is simply, because I only need features in LAN Base and inter-VLAN routing additionally.
I know that Sup 6L-E and 6-E supports 2048 and 4096 SVI but guestion is in what software version IP Base or Enterprise?
Please, look for a picture below. Why RIP is in LAN Base software version, maybe it's possible to configure more than one SVI.
06-28-2010 04:27 AM
Some explanation:
It's possible to configure on CAT 4500 with LAN Base software about 2000 SVI interface and inter-VLAN routing too.
Kamil
06-28-2010 04:41 AM
It supports 4096 SVI's . It shouldn't matter if its ipbase or enterprise . The main diference between the 2 is that enterprise supports all the dynamic routing protocols like eigrp, ospf, bgp .. etcc , where the ipbase does not . it only supports static, rip, eigrp stub...
06-28-2010 04:51 AM
On 6L-E supervisor it's support only 2048 SVI's for a example on bundle WS-C4507RES6L-96V+.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide