12-05-2006 01:10 AM - edited 03-05-2019 01:10 PM
Hi,
What is the reason that Sup 32 has to be inserted into the same slots as Sup 720. I understand the requirement for Sup 720 because of the integrated SFM. But Sup 32 does not have a SFM. So Why do I have to instert it e.g. in C6506/09 into Slot 5 or 6?
Thanks
Solved! Go to Solution.
12-13-2006 12:15 AM
No, this is from audio track. There was exact same question asked and the answer was like "You should use the same slot for both Sup32 and 720... This was done for unification purposes".
12-11-2006 07:15 AM
I am not sure but I think the reason to have sup32 in same slot as sup720 is for enhanced card support.
12-11-2006 11:01 PM
There is no such reason exists :) They did this just for unification and to minimize customers confusion (source - Networkers 2005).
12-12-2006 11:35 PM
Hi,
Thanks for your reply.
Is it also mentioned in a networkers presentation so I can refer to it?
Thanks,
Ramin
12-13-2006 12:15 AM
No, this is from audio track. There was exact same question asked and the answer was like "You should use the same slot for both Sup32 and 720... This was done for unification purposes".
12-13-2006 02:53 AM
Thank you for your reply, Oleg.
Even though I do not understand why slot 1 and 2 are not also supported I think can live with this answer. Thanks again.
Ramin
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide