02-18-2023 01:15 AM
I just buy a Catalyst Switch 1000 (C1000-8T-E-2G-L), i did the initial setup with webgui, but now i cannot access the switch with the standard ip managment address 10.0.0.3, i cannot ping it, nothing.... My Pc is in DHCP mode, but it get just a apipa address..if i put manually an adress to my pc ( 10.0.0.10) within the same subnet, and with no other devices connected to the switch, nothing.. im connected to the switch through normal port with normal ethernet cable, that must be enough, i think. Right now i dont have a console cable..
Solved! Go to Solution.
02-18-2023 03:35 AM
for my view it not sense, it meaning that the SW can gui only one time!!
just try again
and see Caution below
Continuing to hold the Reset button for longer exits the Setup mode.
02-18-2023 02:44 AM
sorry I check and as @balaji.bandi mention there is no dedicate management port for c1000
anyway check the video I share it is so useful.
02-18-2023 02:34 AM
connect to management port not any other port
I am not aware Cat 1000 switch has a dedicated management port, nor I have seen it, what model has this dedicated management port?
02-18-2023 02:45 AM
Thanks a Lot
02-18-2023 03:01 AM
Maybe i have to wait to receive the console cable in order to get forward...right?
02-18-2023 06:37 AM
Hi guys,
Problem solved. I don't know why, but there was no ip on my switch. I connected with the console cable and assigned a new ip address to the vlan1. Now access to the webgui is working. Thanks for your tips and support!
02-18-2023 06:41 AM
glad the issue Solve.
good luck Friend.
02-19-2023 02:04 AM
yes that is what suggestion always, is when you change the IP address, until you click save it will not saved in GUI,
so we asked to connect console cable so we can see what is the issue,
You made it right process, and good all went well, we mark as this resolved now.
02-20-2023 11:32 AM
thanks to you all!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide