catalyst 2950 - reset password

[realiswitch]

hi everybody

i forgot password o my cisco catalyst 2950 switch

do you know how can i reset it?

thanks!

[ankbhasi]

Hi Friend,

Try this link and will help you

http://www.cisco.com/en/US/docs/switches/lan/catalyst3550/software/release/12.1_8_ea1/configuration/guide/swtrbl.html#wp1021182

HTH

Ankur

*Pls rate all helpfull post

[mohammedmahmoud]

Hi,

Kindly follow this document:

http://www.cisco.com/en/US/products/hw/switches/ps628/prod_password_recoveries_list.html

HTH,

Mohammed Mahmoud.

[Pavel Bykov]

You will need physical access to the switch.

[realiswitch]

thanks, it's ok

i followed the steps and i reset the password...

THANKS A LOT!!

Now....may you tell me how can i reset cfg of my 2950?

[MUHAMMAD SHAHEEN]

Hi,

You should follow the document link sent by mohammedmahmoud it will take you through all the required steps to restore previous configuration and change the passwords.

But If you want to erase the current config and re-start everything from scratch, then in type in the following command

Switch#erase nvram:

and that reload the switch

HTH

Shaheen

[glen.grant]

Just use "write erase " then reload the box .

[alexander.belov]

what about the vlan.dat? :)