Catalyst 3650 BOOT EROR

[osamaps2]

H HAVE Catalyst 3650 24PD-L

.On startup the message appears

I wrote a boot and restarted but same problem

[BDG]

Hi

Looks like a flash problem. The screenshot below shows what the drive is Busy.

If the hardware is not critical, format it and re-flash it.

Perhaps some power failure led to this

If you have a valid service contract, contact support with a request, they will help you

[paul driver]

Hello

dir flash:

[osamaps2]

 

[paul driver]

Hello

okay try
flash_init
then
dir flash:

[osamaps2]

 

[BDG]

Try it after the flash_init command

perform a flash file system check:
fsck -test flash:
fsck -f flash:
And
format flash:

If the formatting fails, the flash is most likely corrupted. You can try to repeat these steps after the reboot again, it may help. You need to try

And if there is a valid warranty, it is better to contact

[Leo Laohoo]

Post the complete output to the following command: 

set

[balaji.bandi]

adding to other posts - if this kit got USB stick option get the IOS in to USB Flash and try to boot and format flash

https://wannabelab.blogspot.com/2017/01/password-recovery-on-cisco-3650.html