01-30-2021 09:58 AM - edited 01-30-2021 09:58 AM
H HAVE Catalyst 3650 24PD-L
.On startup the message appears
I wrote a boot and restarted but same problem
01-30-2021 10:39 AM - edited 01-30-2021 10:43 AM
Hi
Looks like a flash problem. The screenshot below shows what the drive is Busy.
If the hardware is not critical, format it and re-flash it.
Perhaps some power failure led to this
If you have a valid service contract, contact support with a request, they will help you
01-30-2021 11:01 AM
Hello
dir flash:
01-30-2021 11:07 AM
01-30-2021 11:36 AM
Hello
okay try
flash_init
then
dir flash:
01-30-2021 12:30 PM
01-30-2021 01:12 PM - edited 01-30-2021 02:01 PM
Try it after the flash_init command
perform a flash file system check:
fsck -test flash:
fsck -f flash:
And
format flash:
If the formatting fails, the flash is most likely corrupted. You can try to repeat these steps after the reboot again, it may help. You need to try
And if there is a valid warranty, it is better to contact
01-30-2021 03:18 PM
Post the complete output to the following command:
set
01-30-2021 04:47 PM
adding to other posts - if this kit got USB stick option get the IOS in to USB Flash and try to boot and format flash
https://wannabelab.blogspot.com/2017/01/password-recovery-on-cisco-3650.html
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide