cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
273
Views
5
Helpful
2
Replies
Beginner

Catalyst 3650 (IOS XE 3.6) with a module GLC-SX-MMD= (DOM capable)

I have a Catalyst 3650 (IOS XE 3.6) with a module GLC-SX-MMD= (DOM capable). When I issue the command 'show interfaces gigabitethernet x/x/x transceiver detail', I can see the real-time operating parameters such as Optical Tx power, Optical Rx power, Laser bias current, Temparature and Transceiver supply voltage. For each parameters, I can see the minimum and maximum thresholds. It's possible costumize these thresholds of such parameters of DOM? When I insert a transceiver without DOM, the link go to state 'UP', but When I insert a Transceiver with DOM capable, the interface stay down. Could you please help me?

Everyone's tags (5)
1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
VIP Expert

Re: Catalyst 3650 (IOS XE 3.6) with a module GLC-SX-MMD= (DOM capable)

As far as I know, you can't modify those parameters.

HTH

View solution in original post

2 REPLIES 2
Highlighted
VIP Expert

Re: Catalyst 3650 (IOS XE 3.6) with a module GLC-SX-MMD= (DOM capable)

As far as I know, you can't modify those parameters.

HTH

View solution in original post

Highlighted
Beginner

Re: Catalyst 3650 (IOS XE 3.6) with a module GLC-SX-MMD= (DOM capable)

Thank you Reza
CreatePlease to create content
Content for Community-Ad