Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a Catalyst 3650 (IOS XE 3.6) with a module GLC-SX-MMD= (DOM capable). When I issue the command 'show interfaces gigabitethernet x/x/x transceiver detail', I can see the real-time operating parameters such as Optical Tx power, Optical Rx power,...
Hello,Does anyone have steps on how to configure Nexus 5k for native fc to a storage controller? See topology:[SERVER] hba <------> FC Port [NEXUS 5548UP] FC Port <-------> FC Port [STORAGE ARRAY]Any info that anyone could provide regarding this woul...
Hi,I received 3 new appliances (02 WAVE274 and 01 WAVE574). All these equipments have the same problem: There is no response from console port. I have a console cable that works fine in the console port of our router, but when I put this console...
The CWM 15.3.00 was installed on a station SUN FIRE V240 (CPU 1280MHz, RAM 4GB, 2 Disk 72GB, 8 GB SWAP). The station has the Solaris 9 and the Solaris patches recommended in the release notes for CWM 15.3.00.When the command CWM (or start_SV+) is iss...
Hi,
It´s compatible. See the link bellow:
https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3850/software/release/16-3/release_notes/ol-16-3-3850.html#pgfId-511253
Additional information: This problem is related to bug CSCtd74470 (E1 R2 configured voice port, intermittently stuck in clearfwd state). http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?caller=pluginredirector&method=fetchBugDetails&...
