cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
7481
Views
0
Helpful
4
Replies

Catalyst 4507 No valid License Found

Hi

In a 4507 we activate the IP Base License. The evaluation period is over.

The Switch is up an running.

This partial output of the show version

License Level: ipbase   Type: Default. No valid license found.

Next reboot license Level: ipbase

The output of the show license command is

License Store: Primary License Storage

StoreIndex: 0 Feature: lanbase  Version: 1.0

      License Type: Permanent

      License State: Active, Not in Use

      License Count: Non-Counted

      License Priority: Medium

StoreIndex: 1 Feature: ipbase  Version: 1.0

      License Type: Evaluation

        Evaluation total period: 8 weeks 4 days

        Evaluation period left: 0 seconds

      License State: Active, Not in Use, EULA accepted

      License Count: Non-Counted

      License Priority: Low

License Store: Dynamic License Storage

License Store: Primary License Storage

License Store: Dynamic License Storage

StoreIndex: 0 Feature: entservices  Version: 1.0

      License Type: Evaluation

        Evaluation total period: 8 weeks 4 days

        Evaluation period left: 8 weeks 4 days

      License State: Active, Not in Use, EULA not accepted

      License Count: Non-Counted

      License Priority: None

What is the meaning of "Not in use" in License status ?

If the switch is reloaded what will happend? The license LAN base will be in use

Thanks

1 Accepted Solution

Accepted Solutions

Ok, thanks. According to the Cisco whitepaper on 4500 licensing:

"If for any reason the system reloads and the "license boot level ipbase | entservices" IOS CLI is saved as part of startup-configuration, the system overrides the base license, and continues to boot in the license level specified in the IOS CLI, even though it is expired. This behavior might be changed in future when licenses will be enforced.

If for any reason the system reloads and the "license boot level ipbase | entservices" IOS CLI is NOT saved as part of startup-configuration, the system will boot in the default LAN Base license."

Hope this helps.

View solution in original post

4 Replies 4

Marvin Rhoads
Hall of Fame
Hall of Fame

When you say say you activated the IP Base license, do you mean you used your PAK to obtain download and install the .lic file on the switch? (license install bootflash:___.lic) Did you then reload the switch for it to apply the license fully?

If you have, then please run the command:

     show license image level

I used the evaluation license IP Base, that comes with the switch.

The switch license is LAN Base.

show license image levels

Module name        Image level  Priority  Configured  Valid license

--------------------------------------------------------------------

WS-X45-SUP7L-E    entservices  1         NO          entservices

                               ipbase         2         YES         ipbase

                               lanbase       3         NO          lanbase

Module Name     Role           Current Level     Reboot Level

--------------------------------------------------------------------

WS-X45-SUP7L-E  Active         ipbase            ipbase

Ok, thanks. According to the Cisco whitepaper on 4500 licensing:

"If for any reason the system reloads and the "license boot level ipbase | entservices" IOS CLI is saved as part of startup-configuration, the system overrides the base license, and continues to boot in the license level specified in the IOS CLI, even though it is expired. This behavior might be changed in future when licenses will be enforced.

If for any reason the system reloads and the "license boot level ipbase | entservices" IOS CLI is NOT saved as part of startup-configuration, the system will boot in the default LAN Base license."

Hope this helps.

Hi

The Licenses boot command is set to IP Base, then if switch reloads it will keep this license, even if the license if a evaluation one.

If I change the license boot command to license boot level lanbase the next reboot I will get the switch with lanbase license and the "No valid license found" might dissapears?

Thanks

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: