Catalyst 6503 OSPF on Vlan Interface

[alex.dersch]

Hello,

i'd like to configure OSPF on a Catalyst 6503 IOS 12.2.17.

i habe an Gi1/9 with the ip address 192.168.97.30/24 and a VLAN 19 with the IP Address 192.168.19.0/24.

I configured OSPF like this

router ospf 1

network 192.168.97.0 0.0.0.255 area 10.5.0.0

network 192.168.19.0 0.0.0.255 area 10.5.0.0

on the ospf peer is see that the adjaceny is established but i don't get the routes for the 192.168.19.0 network

i checked the ip ospf interface vlan 19; i got ospf is not enabled on the interface

then i tried to configure

int vlan 19

ip ospf 1 area 10.5.0.0

but it does not access ip ospf 1

any other way to solve my problem?

regards

alex

[Reza Sharifi]

Hi,

Is vlan 19 in up and up mode? do a "sh ip int bri vlan 19" and check

HTH

[alex.dersch]

hi,

here is the show int vlan 19

Vlan19 is up, line protocol is up

  Hardware is EtherSVI, address is 000b.45b0.68c0 (bia 000b.45b0.68c0)

  Internet address is 192.168.19.1/24

and here is the show ip ospf interface vlan 19

show ip ospf int vlan 19

%OSPF: OSPF not enabled on Vlan19

regards

alex

[Reza Sharifi]

Hi Alex,

Can you try a different area and not 10.5.0.0?

router ospf 1

network 192.168.97.0 0.0.0.255 area 0

network 192.168.19.0 0.0.0.255 area 0

ip ospf 1 area 0

HTH