01-04-2018 11:09 AM - edited 03-08-2019 01:18 PM
I'm looking to implement a couple 9500-40Xs with Network Advantage as core switches at two smaller locations. Any dates on when the 40Xs will support stackwise-virtual? I see, at least based on the release notes, that only the 24 port 40G model supports it currently.
Solved! Go to Solution.
04-17-2018 06:49 AM
01-04-2018 11:33 AM
04-01-2018 05:19 PM
I am wondering if its the fact its Easter delaying it of if they had a problem with the release. Its now 2nd April and not there. I have been waiting on its release all month.
04-04-2018 11:46 AM
I've had a pair of C9500-40X switches in a stackwise-virtual configuration for a few weeks now. We're running 16.6.2b code.
SFM-9500-DIST#show stackwise-virtual Stackwise Virtual Configuration: -------------------------------- Stackwise Virtual : Enabled Domain Number : 255 Switch Stackwise Virtual Link Ports ------ ---------------------- ------ 1 1 TenGigabitEthernet1/0/39 TenGigabitEthernet1/0/40 2 1 TenGigabitEthernet2/0/39 TenGigabitEthernet2/0/40 SFM-9500-DIST#
Switch Ports Model SW Version SW Image Mode ------ ----- ----- ---------- ---------- ---- 1 50 C9500-40X 16.6.2b CAT9K_IOSXE INSTALL * 2 50 C9500-40X 16.6.2b CAT9K_IOSXE INSTALL
04-04-2018 07:55 PM
Does it working properly?
04-08-2018 09:58 AM
We are also running 16.6.2 with Stackwide-virtual on a pair of 9500-40Xs but the upgrade to 16.6.3 does NOT have stackwise-virtual commands available, at least not for the 9500-40Xs.
04-17-2018 04:49 AM
Stackwise virtual support for 9500-40X requires at least 16.8.1a which was just recently released.
Currently it is not possible to using a 40Gbps Interfaces as SVL link.
06-12-2018 08:24 AM
Any idea why it isn't supported on the 40G links yet ?
Could it be that both 40G interfaces are terminated on the same ASIC, and therefore not really redundant ?
04-16-2018 10:46 PM
05-02-2018 07:18 AM
Hi David,
I too, have same model Cisco 9500-40X series with IOS Image 16.6.2b whereas i am unable to do stackwise virtual configuration. can you please help me with guide.
Thanks
05-03-2018 06:14 AM
Upgrade to 16.8. Stackwise-virtual is working on that code release without any issues for us so far.
04-17-2018 05:43 AM - edited 04-17-2018 05:50 AM
Hi
As I remember Virtual Stackwise is supported on C9500-24Q only.
04-17-2018 06:49 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide