CatOS command - equiv. in IOS

[MARK HEUZENROEDER]

Hi,

In CatOS,

sh port capability

shows me which ASIC group a given port is in.

How can I find this out in IOS on C6500?

regards, MH

[Adam Frederick]

show interface if-type capabilities

[royalblues]

Use the following link for CatOS to IOS conversion. CCO login required

http://www.cisco.com/cgi-bin/Support/CatCfgConversion/catcfg_xlat.pl

HTH, rate if it does

Narayan

[MARK HEUZENROEDER]

Dear royalblues,

It is kind of you to Reply.

The util. you refered to is "created to convert the CatOS configuration to the equivalent Cisco IOS command structure".

meaning it can't convert SHOW commands.

Is there a tool to convert SHOW cmds to IOS?

I also found IOS "show int cap" which is same as CatOS "sh port cap".

regards, MH

[abhishek_nandavat]

Hi,

Have a look at the following links -->

http://www.cisco.com/en/US/customer/products/hw/switches/ps708/products_white_paper09186a00800c8441.shtml [Requires CCO Login]

http://whitepapers.zdnet.com/thankyou.aspx?&promo=200111&docid=173038&view=173038

[Paid Download]

I hope they are of some help.

Regards,

AbhisheK

Please rate all helpful posts!!!