cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
3475
Views
0
Helpful
2
Replies

CFC1: Currently running ROMMON from S (Gold) region

Thiyagu VG
Level 1
Level 1

Hi All,

Need your valuable information and help.

I got the below logs in "WS-C6506-E". Kinldy advise.

1) Should i have to take immediate action upon it ?

2) Any ROMMON upgrade would be fine ?

3) What kind of issues will arrive because of this ?

--------------------------------The Logs--------------------------------------

MAG-VSS-1#sh log | i Mar

Mar  7 07:21:00.765: CFC1: Currently running ROMMON from S (Gold) region

MAG-VSS-1#

MAG-VSS-1#sh rom-monitor slot 5 rp

Region F1: INVALID

Region F2: INVALID

Currently running ROMMON from S (Gold) region

MAG-VSS-1#sh rom-monitor slot 5 sp

Region F1: INVALID

Region F2: INVALID

Currently running ROMMON from S (Gold) region

MAG-VSS-1#

MAG-VSS-1#sh module

Mod Ports Card Type                              Model              Serial No.

--- ----- -------------------------------------- ------------------ -----------

  1   24  CEF720 24 port 1000mb SFP              WS-X6724-SFP       SAL1316NL6N

  2   48  48-port 10/100/1000 RJ45 EtherModule   WS-X6148A-GE-TX    SAL1314MP03

  5    5  Supervisor Engine 720 10GE (Active)    VS-S720-10G        SAL1316NGGS

Mod MAC addresses                       Hw    Fw           Sw           Status

--- ---------------------------------- ------ ------------ ------------ -------

  1  0024.c4f5.9ab0 to 0024.c4f5.9ac7   4.1   12.2(18r)S1  12.2(33)SXH4 Ok

  2  0025.4562.c060 to 0025.4562.c08f   1.7   8.4(1)       8.7(0.22)BUB Ok

  5  001f.6cbd.55a8 to 001f.6cbd.55af   3.1   8.5(3)       12.2(33)SXH4 Ok

Mod  Sub-Module                  Model              Serial       Hw     Status

---- --------------------------- ------------------ ----------- ------- -------

  1  Centralized Forwarding Card WS-F6700-CFC       SAL1315N54J  4.1    Ok

  5  Policy Feature Card 3       VS-F6K-PFC3C       SAL1316NDTB  1.0    Ok

  5  MSFC3 Daughterboard         VS-F6K-MSFC3       SAL1316NJXN  1.1    Ok

Mod  Online Diag Status

---- -------------------

  1  Pass

  2  Pass

  5  Pass

MAG-VSS-1#

---------------------------------------------------------------------------------------------------------------------------

Thanks & Regards,

ThiyaguVG.

2 Replies 2

Jo49201
Level 1
Level 1

We are in a similar situation, will probably open a TAC case. 
We did the commande to upgrade the FPGA and gold region + reset HW + reload chassis but it didn't work.

Maybe @Leo Laohoo has an idea. 
I will have to do another soon. 

I do not understand the situation, @Jo49201.  What seems to be the problem?

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Review Cisco Networking products for a $25 gift card