03-29-2011 01:12 AM - edited 03-06-2019 04:19 PM
Hi All,
Need your valuable information and help.
I got the below logs in "WS-C6506-E". Kinldy advise.
1) Should i have to take immediate action upon it ?
2) Any ROMMON upgrade would be fine ?
3) What kind of issues will arrive because of this ?
--------------------------------The Logs--------------------------------------
MAG-VSS-1#sh log | i Mar
Mar 7 07:21:00.765: CFC1: Currently running ROMMON from S (Gold) region
MAG-VSS-1#
MAG-VSS-1#sh rom-monitor slot 5 rp
Region F1: INVALID
Region F2: INVALID
Currently running ROMMON from S (Gold) region
MAG-VSS-1#sh rom-monitor slot 5 sp
Region F1: INVALID
Region F2: INVALID
Currently running ROMMON from S (Gold) region
MAG-VSS-1#
MAG-VSS-1#sh module
Mod Ports Card Type Model Serial No.
--- ----- -------------------------------------- ------------------ -----------
1 24 CEF720 24 port 1000mb SFP WS-X6724-SFP SAL1316NL6N
2 48 48-port 10/100/1000 RJ45 EtherModule WS-X6148A-GE-TX SAL1314MP03
5 5 Supervisor Engine 720 10GE (Active) VS-S720-10G SAL1316NGGS
Mod MAC addresses Hw Fw Sw Status
--- ---------------------------------- ------ ------------ ------------ -------
1 0024.c4f5.9ab0 to 0024.c4f5.9ac7 4.1 12.2(18r)S1 12.2(33)SXH4 Ok
2 0025.4562.c060 to 0025.4562.c08f 1.7 8.4(1) 8.7(0.22)BUB Ok
5 001f.6cbd.55a8 to 001f.6cbd.55af 3.1 8.5(3) 12.2(33)SXH4 Ok
Mod Sub-Module Model Serial Hw Status
---- --------------------------- ------------------ ----------- ------- -------
1 Centralized Forwarding Card WS-F6700-CFC SAL1315N54J 4.1 Ok
5 Policy Feature Card 3 VS-F6K-PFC3C SAL1316NDTB 1.0 Ok
5 MSFC3 Daughterboard VS-F6K-MSFC3 SAL1316NJXN 1.1 Ok
Mod Online Diag Status
---- -------------------
1 Pass
2 Pass
5 Pass
MAG-VSS-1#
---------------------------------------------------------------------------------------------------------------------------
Thanks & Regards,
ThiyaguVG.
03-30-2023 08:10 AM
We are in a similar situation, will probably open a TAC case.
We did the commande to upgrade the FPGA and gold region + reset HW + reload chassis but it didn't work.
Maybe @Leo Laohoo has an idea.
I will have to do another soon.
03-30-2023 03:16 PM
I do not understand the situation, @Jo49201. What seems to be the problem?
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: