cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
3524
Views
0
Helpful
2
Replies

CFC1: Currently running ROMMON from S (Gold) region

Thiyagu VG
Level 1
Level 1

Hi All,

Need your valuable information and help.

I got the below logs in "WS-C6506-E". Kinldy advise.

1) Should i have to take immediate action upon it ?

2) Any ROMMON upgrade would be fine ?

3) What kind of issues will arrive because of this ?

--------------------------------The Logs--------------------------------------

MAG-VSS-1#sh log | i Mar

Mar  7 07:21:00.765: CFC1: Currently running ROMMON from S (Gold) region

MAG-VSS-1#

MAG-VSS-1#sh rom-monitor slot 5 rp

Region F1: INVALID

Region F2: INVALID

Currently running ROMMON from S (Gold) region

MAG-VSS-1#sh rom-monitor slot 5 sp

Region F1: INVALID

Region F2: INVALID

Currently running ROMMON from S (Gold) region

MAG-VSS-1#

MAG-VSS-1#sh module

Mod Ports Card Type                              Model              Serial No.

--- ----- -------------------------------------- ------------------ -----------

  1   24  CEF720 24 port 1000mb SFP              WS-X6724-SFP       SAL1316NL6N

  2   48  48-port 10/100/1000 RJ45 EtherModule   WS-X6148A-GE-TX    SAL1314MP03

  5    5  Supervisor Engine 720 10GE (Active)    VS-S720-10G        SAL1316NGGS

Mod MAC addresses                       Hw    Fw           Sw           Status

--- ---------------------------------- ------ ------------ ------------ -------

  1  0024.c4f5.9ab0 to 0024.c4f5.9ac7   4.1   12.2(18r)S1  12.2(33)SXH4 Ok

  2  0025.4562.c060 to 0025.4562.c08f   1.7   8.4(1)       8.7(0.22)BUB Ok

  5  001f.6cbd.55a8 to 001f.6cbd.55af   3.1   8.5(3)       12.2(33)SXH4 Ok

Mod  Sub-Module                  Model              Serial       Hw     Status

---- --------------------------- ------------------ ----------- ------- -------

  1  Centralized Forwarding Card WS-F6700-CFC       SAL1315N54J  4.1    Ok

  5  Policy Feature Card 3       VS-F6K-PFC3C       SAL1316NDTB  1.0    Ok

  5  MSFC3 Daughterboard         VS-F6K-MSFC3       SAL1316NJXN  1.1    Ok

Mod  Online Diag Status

---- -------------------

  1  Pass

  2  Pass

  5  Pass

MAG-VSS-1#

---------------------------------------------------------------------------------------------------------------------------

Thanks & Regards,

ThiyaguVG.

2 Replies 2

Jo49201
Level 1
Level 1

We are in a similar situation, will probably open a TAC case. 
We did the commande to upgrade the FPGA and gold region + reset HW + reload chassis but it didn't work.

Maybe @Leo Laohoo has an idea. 
I will have to do another soon. 

I do not understand the situation, @Jo49201.  What seems to be the problem?

Review Cisco Networking for a $25 gift card