01-10-2013 11:22 PM - edited 03-07-2019 11:02 AM
Hello All
I have a network where by i have redistributed EIGRP and RIP. My only concern is how do i choose the packet to traverse over the RIP network instead of the EIGRP network.
I have tried increasing the EIGRP AD to 200 but the preferable path chosen is still EIGRP
I just need to select the RIP path over a certain IP segment eg 20.20.20.2 and all other routes go via EIGRP.
I have tried route-maps, access list but no positive ending.
Kindly help
THX in advance
01-11-2013 01:16 AM
Hi,
Post here RIP/EIGRP configuration (without sesitive info like public IPs) and Network topology in that way we are able help much better.
Hope it will help.
Best regards,
Abzal
01-11-2013 01:31 AM
Hello Jernail,
Both RIP & Eigrp use the source ip address of the advertising router and the destination network of the actual network.
Source=Avertising router
Dest=Actual network
So let say your advertised interface is 10.1.12.2 -
Access-list 20 permit 20.20.20.0.0.0.0.255
router rip
distance 121 10.1.12.2 0.0.0.0 20
res
Paul
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide