Hi All,
I am unable to determine if policy based routing feature is available on a Cisco 2960 switch. This is the exact model
Switch Model : WS-C2960X-24PD-L
SW Version : 15.0(2)EX5
SW Image : C2960X-UNIVERSAL-M
SDM prefer shows as this on the switch "The current template is "lanbase-default" template". The Cisco guide tells "NOT TO ENABLE ROUTING TEMPLATE WHEN LANBASE DEFAULT IS SETUP" not sure why ?
When i try to type in the ip policy or route-map command the cli says "unrecognized" command.
Thanks