12-23-2019 02:22 PM
Hello ;
I have a 3750G switch that it has flash not detected on Roman mode, I try flash_init and dir flash: but no look as below :
switch: flash_init
Initializing Flash...
...The flash is already initialized.
switch: dir
List of filesystems currently registered:
bs[0]: (read-only)
xmodem[3]: (read-only)
null[4]: (read-write)
Can anyone help me fix that issue .
12-23-2019 03:33 PM
@youness10 wrote:
switch: dir
The syntax is incorrect. Try "dir flash:".
12-25-2019 01:33 PM
12-25-2019 03:27 PM
12-26-2019 12:53 PM
12-26-2019 06:25 PM
12-27-2019 03:24 AM
Hello ,
As demand ; below is the output fo set command :
switch: set
BAUD=9600
BOARD_CONFIG_REV=0
BOOT=flash:c3750-ipbasek9-mz.122-55.SE12.bin
CLEI_CODE_NUMBER=COMP600ARA
DBRD_PIXAR2TITANIUM_ASSEMBLY_PART_NUM=73-11329-02
DBRD_PIXAR2TITANIUM_REVISION_NUM=B0
DBRD_PIXAR2TITANIUM_SERIAL_NUM1=FDO14330DLA
DBRD_PIXAR2TITANIUM_SERIAL_NUM2=FDO14330DLP
MAC_ADDR=68:BD:AB:31:BF:80
MODEL_NUM=WS-C3750V2-48PS-S
MODEL_REVISION_NUM=H0
MOTHERBOARD_ASSEMBLY_NUM=73-11705-12
MOTHERBOARD_REVISION_NUM=A0
MOTHERBOARD_SERIAL_NUM=FDO143310Y5
POWER_SUPPLY_PART_NUM=341-0266-02
POWER_SUPPLY_SERIAL_NUM=DCA1430H93N
SDM_TEMPLATE_ID=0
SWITCH_NUMBER=1
SWITCH_PRIORITY=1
SYSTEM_SERIAL_NUM=FDO1433Z11N
TAN_NUM=800-31041-05
-- MORE --
TAN_REVISION_NUMBER=A0
VERSION_ID=V05
confreg=
12-27-2019 04:27 AM
12-23-2019 06:29 PM - edited 12-23-2019 06:31 PM
As mentioned by Leo, if you want to look at the files in the flash, you need to specify the flash: as part of the dir command, ie dir flash:
See https://www.cisco.com/c/en/us/support/docs/switches/catalyst-2950-series-switches/41845-192.html for some examples.
Please remember to mark helpful responses and to set your question as answered if appropriate.
12-25-2019 01:32 PM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide