12-13-2022 11:30 PM
Hello,
I need to know switch Cisco 3750 POE 10/100 48 Port can run Hikvission Cameras on it or no.
12-13-2022 11:43 PM
what is the Full Model of Cisco 3750 ( check the model that support PoE)
Hikvission Cameras - Camera need 802.af - that should be ok for the switch to delivery power. (this is based on the document)
12-14-2022 12:39 AM
yes, it is support POE but I'm afraid that the switch is only 10/100 not 10/100/1000
12-14-2022 01:39 AM
as long it has PoE that Camera meet the requirement of the power, the device should on. (have you tried it ?)
12-14-2022 02:11 AM
Camera Power:12V (POE 802.3af,37-57V)
12-14-2022 02:24 AM
it is support POE but I'm afraid that the switch is only 10/100 not 10/100/1000
as i mentioned that is standard of PoE, have you connected and tested ? what is the issue here ?
12-14-2022 01:45 AM
12-14-2022 02:13 AM
Camera Power:12V (POE 802.3af,37-57V)
12-14-2022 02:21 AM
What is the exact model of the switch?
12-14-2022 02:29 AM
Model: WS-C3750-48PS-S 10/100
12-14-2022 02:41 AM
That model can support up to 15.4wac but has a 375wac power budget.
12-14-2022 02:49 AM
you mean the switch is support the POE Cameras but will not have more than 25 cameras on it ,approximately.
12-14-2022 03:25 AM
If all cameras pull 15.4wac, then the switch can only power 24 cameras.
12-14-2022 03:41 AM
Thank you for the your help, and I'm sorry for any inconvenience.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: