05-20-2019 06:54 AM
5x Cisco 3750E-48TD
Firmware 15.0.2
Hello,
i have on my stack a cpu utilization from 65% constant.
Actually i have the master (15) on switch1 there also have the 10g uplinks running.
Is it possible to move the master to an other member without any reboot or disconnects?
Thanks,
Best regards
Cando
Solved! Go to Solution.
05-20-2019 06:58 AM
Hi there,
You can change the priority values whilst the stack is running, but the only way to actualy move the master is to reboot the current stack master.
Incidentally it goes against 3750 best practice to have the master on the same switch which connects the uplinks.
cheers,
Seb.
05-20-2019 06:58 AM
Hi there,
You can change the priority values whilst the stack is running, but the only way to actualy move the master is to reboot the current stack master.
Incidentally it goes against 3750 best practice to have the master on the same switch which connects the uplinks.
cheers,
Seb.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide