We have a 3945E router which had been isolated from the network due to recabling (but not powered down) for a few weeks. When it was reconnected to the network the links did not come up and the router did not respond to console requests (not recognized at all / no output). It was decided to power cycle the router, this caused a single line to appear on the console- "FATAL ERROR: ERR_DDR_DQSOFFCAL" there is no further visible attempt to boot and no other response or indication. An additional power cycle yielded the identical result. All port indicator lights on the router are off. I could not find this fault or anything remotely similar on this forum or Google. Any help would be greatly appreciated. Thanks, Mike
Reseating the DRAM was out thought as well, and it did solve the issue (well that or reseating the PVMD, because we did them all together). However I was hoping someone had seen the error before or could explain it. Thanks, Mike
The problems has been seen before and the [official] solution is to reseat the RAM module.
Getting Started
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:
