03-15-2024 06:47 AM
good morning community , I had this user with slow network speed, and check the config and all looked good, i also changed their vlan to a different one an still the network speed was slow (like under 100mbps..upload and 13kbps download).. moved the port to a different one on the same blade but nothing change in the speed
but the weird thing is that once, i moved the port to bladed 3 of the 4506 with the same exact configuration on blade 2 port.. the speed was regularized and fast.... to make sure it wasnt just lucky day, i went back to blade 2, resetted that interface to factory default, reapplied the same configuration on the port on blade 2, same slowness came back, but on blade 3, fast network speed.
Questions:
1-what could be the reason
2-is there any command to very my cisco catalyst blade health or status?
the show loggins did not provide any conclusive infos. please help
03-15-2024 06:55 AM
Hi,
Can you verify to see if all the blades are healthy using the "sh module" command?
If you can, post the output here.
HTH
03-15-2024 07:00 AM
03-15-2024 07:14 AM
unless you meant this info
03-15-2024 07:00 AM
Hi, here are the result for the show module, it does not provide much info tho
4506E#sh module
Chassis Type : WS-C4506-E
Power consumed by backplane : 0 Watts
Mod Ports Card Type Model Serial No.
---+-----+--------------------------------------+------------------+-----------
1 4 Sup 7-E 10GE (SFP+), 1000BaseX (SFP) WS-X45-SUP7-E CATL1GC
2 48 10/100/1000BaseT UPOE E Series WS-X4748-UPOE+E CAT153
3 48 10/100/1000BaseT UPOE E Series WS-X4748-UPOE+E CAT101K
4 48 10/100/1000BaseT Premium POE E Series WS-X4748-RJ45V+E CAT1601L2YL
5 48 10/100/1000BaseT Premium POE E Series WS-X4648-RJ45V+E JAE03S4
6 48 10/100/1000BaseT Premium POE E Series WS-X4648-RJ45V+E JAE109M
03-15-2024 08:10 AM
Hi,
The "show module" or "sh module all" should give you the status of all the modules.
HTH
03-15-2024 08:23 AM
Another show command to get more info per module:
sh platform chassis module x
HTH
03-15-2024 08:38 AM
03-15-2024 05:47 PM
The firmware of the chassis is highly suspicious.
03-16-2024 04:50 AM
thanks for potting that, i will try an upgrade and see if that help
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide