Dear guys
My company is using 2 4507 switch (running VSS, 1 active, 1 stanby)
Each switch has a control card: WS-X45-SUP7-E
WS-X45-SUP7-E
CORE-C4507-VSS#sh processes cpu
Core 0: CPU utilization for five seconds: 21%; one minute: 19%; five minutes: 18%
Core 1: CPU utilization for five seconds: 86%; one minute: 87%; five minutes: 87%
CORE-C4507-VSS#sh processes cpu | ex 0.00
Core 0: CPU utilization for five seconds: 6%; one minute: 10%; five minutes: 15%
Core 1: CPU utilization for five seconds: 99%; one minute: 95%; five minutes: 89%
PID Runtime(ms) Invoked uSecs 5Sec 1Min 5Min TTY Process
4184 79948 952285 83 0.04 0.02 0.03 0 system_mgr
4453 2583202 13113339 196 0.44 0.39 0.40 0 ffm
4456 314968 1003254 313 0.04 0.04 0.04 0 cpumemd
4498 3892794 596959568 574 52.3 52.2 52.2 34816 iosd
I see that the CPU Core 1 is always high, some time it exceed to 99% while Core 0 is free all time ?. So some time I feel some connections are slow, I guess that is processed by Core 1 CPU.
I found WS-X45-SUP7-E use dual core CPU, so both Core 0 and Core 1 are located in single switch or each of them on a switch ?
Can someone help me to clear this issue. Thank you !
