04-01-2023 07:07 AM
Each core switch have 2 supervisor engine module VS-S720-10G. Total 4 supervisor engine module. If one module in switch A failed then the other switch B module takeover.
The problem is one module in switch B is faulty. Which is not active. And i want to replace it without downtime.
Question: how can i replace it ?
04-01-2023 07:21 AM
Hi
Highly recommend you to read this document.
Then come after before with specific questions.
04-01-2023 04:28 PM
@abdullahsn91 wrote:
And i want to replace it without downtime.
Make sure the replacement line card has the same IOS version as the rest of the VSS.
Make sure the replacement line card has the same DFC/PFC card as the rest.
04-04-2023 04:42 AM
Need help. If the new line card have different ios then how to replace the ios with the current version
Secondly, how the new card will take configuration? Should it take by itself from active supervisor engine or i have to write command for it
04-04-2023 05:06 AM
@abdullahsn91 wrote:
If the new line card have different ios then how to replace the ios with the current version
Look at the Sup720. Does it have a CF slot?
04-04-2023 05:52 AM
Yes it have the CF slot. I also need to know how to copy configuration to disk0/cf and how to retrive it.
04-04-2023 09:46 PM
copy flash:filename.bin disk0:
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide