ā01-07-2016 11:11 AM - edited ā03-08-2019 03:20 AM
Hello,
With a 6509 catalyst configured with vss can I configure port-channel?
Thanks.
Solved! Go to Solution.
ā01-07-2016 12:12 PM
Yes. That should not be an issue
From my lab where we have port chnanel configured.It includes the VSL links as well.
S720_VSS#sh etherc sum <snip>
Group Port-channel Protocol Ports
------+-------------+-----------+-----------------------------------------------
10 Po10(RU) - Te1/5/4(P) Te1/5/5(P) Te1/6/4(P)
Te1/6/5(P)
20 Po20(RU) - Te2/5/4(P) Te2/5/5(P) Te2/6/4(P)
Te2/6/5(P)
30 Po30(SD) -
31 Po31(SD) -
64 Po64(SU) LACP Gi1/5/3(P) Gi1/6/3(P) Gi2/5/3(P)
Gi2/6/3(P)
-Raj
ā01-07-2016 11:35 AM
The VSS just aggregates 2 switches into one logical entity with a single control plane.
Port channel configuration is exactly the same as what you could do on a standalone 6500.
-Raj
ā01-07-2016 12:02 PM
Hello Rajeshkumar,
thanks for you update, so I can create a port-channl on any catalyst and IOS device with VSS configured?
thanks.!
ā01-07-2016 12:12 PM
Yes. That should not be an issue
From my lab where we have port chnanel configured.It includes the VSL links as well.
S720_VSS#sh etherc sum <snip>
Group Port-channel Protocol Ports
------+-------------+-----------+-----------------------------------------------
10 Po10(RU) - Te1/5/4(P) Te1/5/5(P) Te1/6/4(P)
Te1/6/5(P)
20 Po20(RU) - Te2/5/4(P) Te2/5/5(P) Te2/6/4(P)
Te2/6/5(P)
30 Po30(SD) -
31 Po31(SD) -
64 Po64(SU) LACP Gi1/5/3(P) Gi1/6/3(P) Gi2/5/3(P)
Gi2/6/3(P)
-Raj
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide