10-07-2006 01:05 AM - edited 03-05-2019 12:07 PM
We have cisco 6509 with the following configuration
System Bootstrap Version: 7.1(1)
System Web Interface Version: Engine Version: 5.3Q ADP Device: Cat6000 ADP Versi
on: 1.7 ADK: 40
Hardware Version: 2.0 Model: WS-C6509 Serial #: SCA054700KA
PS1 Module: WS-CAC-1300W Serial #: SNI05410479
PS2 Module: WS-CAC-1300W Serial #: SNI05421158
Mod Port Model Serial # Versions
--- ---- ------------------- ----------- --------------------------------------
1 2 WS-X6K-SUP2-2GE SAL06334EV0 Hw : 3.10
Fw : 7.1(1)
Fw1: 6.1(3)
Sw : 7.1(2)
Sw1: 7.1(2)
WS-F6K-PFC2 SAL06324E2G Hw : 3.2
2 2 WS-X6K-SUP2-2GE SAL06334EUB Hw : 3.10
Fw : 7.1(1)
Fw1: 6.1(3)
Sw : 7.1(2)
Sw1: 7.1(2)
WS-F6K-PFC2 SAL06324BCH Hw : 3.2
4 48 WS-X6348-RJ-45 SAL0543DJJ4 Hw : 5.0
Fw : 5.4(2)
Sw : 7.1(2)
6 8 WS-X6408A-GBIC SAL06468JTQ Hw : 2.1
Fw : 5.4(2)
Sw : 7.1(2)
7 8 WS-X6408A-GBIC SAL06509Y7N Hw : 2.1
Fw : 5.4(2)
Sw : 7.1(2)
15 1 WS-F6K-MSFC2 SAL06324EAQ Hw : 2.5
Fw : 12.1(11b)E4
Sw : 12.1(11b)E4
16 1 WS-F6K-MSFC2 SAL06334FBN Hw : 2.5
Fw : 12.1(11b)E4
Sw : 12.1(11b)E4
DRAM FLASH NVRAM
Module Total Used Free Total Used Free Total Used Free
------ ------- ------- ------- ------- ------- ------- ----- ----- -----
1 130944K 62484K 68460K 32768K 11264K 21504K 512K 286K 226K
is it possiable to add a 48 port 1000 BaseT module on this? if yes what is the part no: I need to order and also tell us what version should run on these sup
engine
thanks
10-07-2006 02:01 AM
Hi
I have the below module in 6509
4 4 48 10/100/1000BaseT Ethernet WS-X6548-GE-TX no ok
Thanks
Mahmood
10-07-2006 04:48 AM
are you using the sup engin 2
Thanks
10-07-2006 06:42 AM
Hi Friend,
You can go ahead and add a 48 port module in your chassia. It meets all the hardware requirement but nit the software requirement. Cisco's recommended Cat OS version for a 48 port module is 7.6.9.
Please check the release notes for more details on the same :
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/relnotes/ol_1982.htm#wp20834
HTH, Please rate if it does.
-amit singh
10-11-2006 12:51 AM
thanks amit
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide