cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
550
Views
0
Helpful
2
Replies

Cisco 861W Interal AP not booting

Gerry Egan
Level 1
Level 1

Hi there,

I tried to upgrade the IOS on my internal AP and now I am in a reboot cycle. I have tried to manually boot the old and new IOS images from the rommon but neither are working. here is the output I am getting:

ap: dir flash:

Directory of flash:/

2    -rwx  6563840   <date>               ap801-k9w7-tar.124-21a.JY.tar

4    drwx  256       <date>               ap801-k9w7-mx.124-21a.JA1

152  -rwx  548       <date>               env_vars

153  -rwx  2775      <date>               cpconfig-ap801.cfg

154  -rwx  2775      <date>               back_up.txt

155  -rwx  3763      <date>               config.txt

156  -rwx  168       <date>               r0.rcore

157  -rwx  3775      <date>               backup1234

158  -rwx  3553      <date>               private-config

159  drwx  256       <date>               ap801-k9w7-mx.124-21a.JY

307  -rwx  1048      <date>               private-multiple-fs

11915776 bytes available (19566080 bytes used)

ap:

ap: dir flash:/ap801-k9w7-mx.124-21a.JA1

Directory of flash:/ap801-k9w7-mx.124-21a.JA1/

5    drwx  64        <date>               html

149  -rwx  5714717   <date>               ap801-k9w7-mx.124-21a.JA1

150  -rwx  97896     <date>               8001.img

151  -rwx  287       <date>               info

11915776 bytes available (19566080 bytes used)

ap: boot flash:/ap801-k9w7-mx.124-21a.JA1/ap801-k9w7-mx.124-21a.JA1

Loading "flash:/ap801-k9w7-mx.124-21a.JA1/ap801-k9w7-mx.124-21a.JA1"...############################################################################################################################################################################################################################

File "flash:/ap801-k9w7-mx.124-21a.JA1/ap801-k9w7-mx.124-21a.JA1" uncompressed and installed, entry point: 0x3000

executing...

              Restricted Rights Legend

Use, duplication, or disclosure by the Government is

subject to restrictions as set forth in subparagraph

(c) of the Commercial Computer Software - Restricted

Rights clause at FAR sec. 52.227-19 and subparagraph

(c) (1) (ii) of the Rights in Technical Data and Computer

Software clause at DFARS sec. 252.227-7013.

           cisco Systems, Inc.

           170 West Tasman Drive

           San Jose, California 95134-1706

Cisco IOS Software, AP801 Software (AP801-K9W7-M), Version 12.4(21a)JA1, RELEASE SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2009 by Cisco Systems, Inc.

Compiled Wed 16-Sep-09 18:59 by prod_rel_team

Proceeding with system init

Proceeding to unmask interrupts

Initializing flashfs...

flashfs[1]: 293 files, 13 directories

flashfs[1]: 0 orphaned files, 0 orphaned directories

flashfs[1]: Total bytes: 31481856

flashfs[1]: Bytes used: 19566080

flashfs[1]: Bytes available: 11915776

flashfs[1]: flashfs fsck took 5 seconds.

flashfs[1]: Initialization complete....done Initializing flashfs.

Warning:  the compile-time code checksum does not appear to be present.

Radio0  present A600 8000 A8020000 0 A8030000 30

IOS Bootloader - Starting system.

FLASH CHIP:  Spansion Mirrorbit (0001)

Xmodem file system is available.

Bringing up flash file system:

flashfs[0]: 293 files, 13 directories

flashfs[0]: 0 orphaned files, 0 orphaned directories

flashfs[0]: Total bytes: 31481856

flashfs[0]: Bytes used: 19566080

flashfs[0]: Bytes available: 11915776

flashfs[0]: flashfs fsck took 17 seconds.

Reading cookie from flash parameter block...done.

Base Ethernet MAC address: 64:00:f1:77:76:78

Ethernet Interface initialize.

Ethernet Interface initialize OK.

TFTP initialize OK.

Boot system image.

Loading "flash:/ap801-k9w7-mx.124-21a.JA1/ap801-k9w7-mx.124-21a.JA1"...##################################################################################################################################################################################################

File "flash:/ap801-k9w7-mx.124-21a.JA1/ap801-k9w7-mx.124-21a.JA1" uncompressed and installed, entry point: 0x3000

executing...

              Restricted Rights Legend

Use, duplication, or disclosure by the Government is

subject to restrictions as set forth in subparagraph

(c) of the Commercial Computer Software - Restricted

Rights clause at FAR sec. 52.227-19 and subparagraph

(c) (1) (ii) of the Rights in Technical Data and Computer

Software clause at DFARS sec. 252.227-7013.

           cisco Systems, Inc.

           170 West Tasman Drive

           San Jose, California 95134-1706

Cisco IOS Software, AP801 Software (AP801-K9W7-M), Version 12.4(21a)JA1, RELEASE SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2009 by Cisco Systems, Inc.

Compiled Wed 16-Sep-09 18:59 by prod_rel_team

Proceeding with system init

Proceeding to unmask interrupts

IOS Bootloader - Starting system.

FLASH CHIP:  Spansion Mirrorbit (0001)

Xmodem file system is available.

Bringing up flash file system:

flashfs[0]: 293 files, 13 directories

flashfs[0]: 0 orphaned files, 0 orphaned directories

flashfs[0]: Total bytes: 31481856

flashfs[0]: Bytes used: 19566080

flashfs[0]: Bytes available: 11915776

flashfs[0]: flashfs fsck took 18 seconds.

Reading cookie from flash parameter block...done.

Base Ethernet MAC address: 64:00:f1:77:76:78

Ethernet Interface initialize.

Ethernet Interface initialize OK.

TFTP initialize OK.

Boot system image.

Loading "flash:/ap801-k9w7-mx.124-21a.JA1/ap801-k9w7-mx.124-21a.JA1"...######################################

Can you advise if I am doing something wrong or is there  a problem with my access point. The router is working fine.

Thanks!

1 Accepted Solution

Accepted Solutions

Reza Sharifi
Hall of Fame
Hall of Fame

Hi,

Not familiar with the APs, but do you have the correct image on your device?

I only see below image on CCO

Can you verify?

ap801-k9w7-tar.152-2.JA.tar

HTH

View solution in original post

2 Replies 2

Reza Sharifi
Hall of Fame
Hall of Fame

Hi,

Not familiar with the APs, but do you have the correct image on your device?

I only see below image on CCO

Can you verify?

ap801-k9w7-tar.152-2.JA.tar

HTH

Gerry Egan
Level 1
Level 1

Thanks for your help. I have discovered that the unit is faulty.

thanks anyway.

Review Cisco Networking products for a $25 gift card