cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
475
Views
0
Helpful
2
Replies

Cisco 861W Interal AP not booting

Gerry Egan
Beginner
Beginner

Hi there,

I tried to upgrade the IOS on my internal AP and now I am in a reboot cycle. I have tried to manually boot the old and new IOS images from the rommon but neither are working. here is the output I am getting:

ap: dir flash:

Directory of flash:/

2    -rwx  6563840   <date>               ap801-k9w7-tar.124-21a.JY.tar

4    drwx  256       <date>               ap801-k9w7-mx.124-21a.JA1

152  -rwx  548       <date>               env_vars

153  -rwx  2775      <date>               cpconfig-ap801.cfg

154  -rwx  2775      <date>               back_up.txt

155  -rwx  3763      <date>               config.txt

156  -rwx  168       <date>               r0.rcore

157  -rwx  3775      <date>               backup1234

158  -rwx  3553      <date>               private-config

159  drwx  256       <date>               ap801-k9w7-mx.124-21a.JY

307  -rwx  1048      <date>               private-multiple-fs

11915776 bytes available (19566080 bytes used)

ap:

ap: dir flash:/ap801-k9w7-mx.124-21a.JA1

Directory of flash:/ap801-k9w7-mx.124-21a.JA1/

5    drwx  64        <date>               html

149  -rwx  5714717   <date>               ap801-k9w7-mx.124-21a.JA1

150  -rwx  97896     <date>               8001.img

151  -rwx  287       <date>               info

11915776 bytes available (19566080 bytes used)

ap: boot flash:/ap801-k9w7-mx.124-21a.JA1/ap801-k9w7-mx.124-21a.JA1

Loading "flash:/ap801-k9w7-mx.124-21a.JA1/ap801-k9w7-mx.124-21a.JA1"...############################################################################################################################################################################################################################

File "flash:/ap801-k9w7-mx.124-21a.JA1/ap801-k9w7-mx.124-21a.JA1" uncompressed and installed, entry point: 0x3000

executing...

              Restricted Rights Legend

Use, duplication, or disclosure by the Government is

subject to restrictions as set forth in subparagraph

(c) of the Commercial Computer Software - Restricted

Rights clause at FAR sec. 52.227-19 and subparagraph

(c) (1) (ii) of the Rights in Technical Data and Computer

Software clause at DFARS sec. 252.227-7013.

           cisco Systems, Inc.

           170 West Tasman Drive

           San Jose, California 95134-1706

Cisco IOS Software, AP801 Software (AP801-K9W7-M), Version 12.4(21a)JA1, RELEASE SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2009 by Cisco Systems, Inc.

Compiled Wed 16-Sep-09 18:59 by prod_rel_team

Proceeding with system init

Proceeding to unmask interrupts

Initializing flashfs...

flashfs[1]: 293 files, 13 directories

flashfs[1]: 0 orphaned files, 0 orphaned directories

flashfs[1]: Total bytes: 31481856

flashfs[1]: Bytes used: 19566080

flashfs[1]: Bytes available: 11915776

flashfs[1]: flashfs fsck took 5 seconds.

flashfs[1]: Initialization complete....done Initializing flashfs.

Warning:  the compile-time code checksum does not appear to be present.

Radio0  present A600 8000 A8020000 0 A8030000 30

IOS Bootloader - Starting system.

FLASH CHIP:  Spansion Mirrorbit (0001)

Xmodem file system is available.

Bringing up flash file system:

flashfs[0]: 293 files, 13 directories

flashfs[0]: 0 orphaned files, 0 orphaned directories

flashfs[0]: Total bytes: 31481856

flashfs[0]: Bytes used: 19566080

flashfs[0]: Bytes available: 11915776

flashfs[0]: flashfs fsck took 17 seconds.

Reading cookie from flash parameter block...done.

Base Ethernet MAC address: 64:00:f1:77:76:78

Ethernet Interface initialize.

Ethernet Interface initialize OK.

TFTP initialize OK.

Boot system image.

Loading "flash:/ap801-k9w7-mx.124-21a.JA1/ap801-k9w7-mx.124-21a.JA1"...##################################################################################################################################################################################################

File "flash:/ap801-k9w7-mx.124-21a.JA1/ap801-k9w7-mx.124-21a.JA1" uncompressed and installed, entry point: 0x3000

executing...

              Restricted Rights Legend

Use, duplication, or disclosure by the Government is

subject to restrictions as set forth in subparagraph

(c) of the Commercial Computer Software - Restricted

Rights clause at FAR sec. 52.227-19 and subparagraph

(c) (1) (ii) of the Rights in Technical Data and Computer

Software clause at DFARS sec. 252.227-7013.

           cisco Systems, Inc.

           170 West Tasman Drive

           San Jose, California 95134-1706

Cisco IOS Software, AP801 Software (AP801-K9W7-M), Version 12.4(21a)JA1, RELEASE SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2009 by Cisco Systems, Inc.

Compiled Wed 16-Sep-09 18:59 by prod_rel_team

Proceeding with system init

Proceeding to unmask interrupts

IOS Bootloader - Starting system.

FLASH CHIP:  Spansion Mirrorbit (0001)

Xmodem file system is available.

Bringing up flash file system:

flashfs[0]: 293 files, 13 directories

flashfs[0]: 0 orphaned files, 0 orphaned directories

flashfs[0]: Total bytes: 31481856

flashfs[0]: Bytes used: 19566080

flashfs[0]: Bytes available: 11915776

flashfs[0]: flashfs fsck took 18 seconds.

Reading cookie from flash parameter block...done.

Base Ethernet MAC address: 64:00:f1:77:76:78

Ethernet Interface initialize.

Ethernet Interface initialize OK.

TFTP initialize OK.

Boot system image.

Loading "flash:/ap801-k9w7-mx.124-21a.JA1/ap801-k9w7-mx.124-21a.JA1"...######################################

Can you advise if I am doing something wrong or is there  a problem with my access point. The router is working fine.

Thanks!

1 Accepted Solution

Accepted Solutions

Reza Sharifi
Hall of Fame Master Hall of Fame Master
Hall of Fame Master

Hi,

Not familiar with the APs, but do you have the correct image on your device?

I only see below image on CCO

Can you verify?

ap801-k9w7-tar.152-2.JA.tar

HTH

View solution in original post

2 Replies 2

Reza Sharifi
Hall of Fame Master Hall of Fame Master
Hall of Fame Master

Hi,

Not familiar with the APs, but do you have the correct image on your device?

I only see below image on CCO

Can you verify?

ap801-k9w7-tar.152-2.JA.tar

HTH

Gerry Egan
Beginner
Beginner

Thanks for your help. I have discovered that the unit is faulty.

thanks anyway.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Recognize Your Peers