Hi everybody,
I've got a problem with Wifi on a 877W, once I configure a ssid under the dott11radio interface the router crashes.
Here's what I get:
CMD: 'ssid wifi-877' 02:44:16 UTC Fri Mar 1 2002
*Mar 1 02:44:16.810: %DOT11-6-FREQ_SCAN: Interface Dot11Radio0, Scanning frequencies for 52 seconds
*Mar 1 02:44:16.810: %DOT11-3-POWERS_INVALID: Interface Dot11Radio0, no valid power levels available
*Mar 1 02:44:16.814: %DOT11-3-POWERS_INVALID: Interface Dot11Radio0, no valid power levels available
02:44:20 UTC Fri Mar 1 2002: Unexpected exception to CPU: vector 300, PC = 0x80491AAC, LR = 0x80477D18
-Traceback= 0x80491AACz 0x80477D18z 0x80479468z 0x80479544z 0x803EF468z 0x803F6EB0z 0x803F8438z 0x80385C30z 0x8036CC00z
CPU Register Context:
MSR = 0x00009032 CR = 0x24008022 CTR = 0x80491A24 XER = 0x00000000
R0 = 0x80477D18 R1 = 0x8462F240 R2 = 0xFFF4FFF4 R3 = 0x846D7144
R4 = 0x00000001 R5 = 0x00000000 R6 = 0x00000001 R7 = 0x00000000
R8 = 0x846D769C R9 = 0x80491A24 R10 = 0x00000001 R11 = 0x00000000
R12 = 0x24008022 R13 = 0x8FFFFF30 R14 = 0x803F82BC R15 = 0x00000000
R16 = 0x00000000 R17 = 0x00000000 R18 = 0x00000000 R19 = 0x00000000
R20 = 0x0000003C R21 = 0x83540000 R22 = 0x00000000 R23 = 0x00000001
R24 = 0x00000000 R25 = 0x8462F778 R26 = 0x846D7144 R27 = 0x8468E044
R28 = 0x846D7144 R29 = 0x00000000 R30 = 0x0000000D R31 = 0x00000001
And the crashinfo file has got this info:
Radio country code is not properly programmed in eeprom, value 65535
Can anyone tell me if this is a faulty hardware or a faulty software or firmware.
Regards
Alain
Don't forget to rate helpful posts.
Don't forget to rate helpful posts.
