05-08-2017 09:17 AM - edited 03-08-2019 10:29 AM
Hello,
Here is my network :
on Fastethernet 0 , my internal network with a dhcp pool 192.168.1.X on Vlan 1
I would like create a PPPOE connection based on fastehternet 3 and i would like to route FA0 to FA3 for internet request.
In attachment my tested configuration, but It doesn't work.
DO you have a exemple for this configuration?
Thank you
Regards,
05-09-2017 12:56 PM
Here is a very good example of configuration: http://pingbin.com/2014/09/cisco-887va-m-vdsl2-pppoe-configuration/ and other: http://ganomi.com/index.php/10-cisco-887va-configuration
Read it and if you have a question you can write me for help.
---Do not forget to rate useful post.---
Regards,
05-10-2017 03:29 AM
Hi
you need to add ip nat command under Dialer0
interface dialer0
ip nat outside
HTH
Hitesh
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide