03-08-2021 05:08 AM
where/how can i find a cisco programmer for four (4) 9300 switches in/near tampa, florida?
independent contractor or small company. 2-3 day job maximum. very simple network.
the support page gives me companies no closer than Houston.
Solved! Go to Solution.
03-08-2021 06:35 AM
Hi,
You may want to call this company. They have 4 locations in Florida including one in Tampa.
https://www.progent.com/Progent-Locations-Local.htm
HTH
03-08-2021 05:47 AM
Are you Looking for an Engineer who can install you these switches near your area,? maybe check IT, network consultant - using Google or contractor can help you.
03-08-2021 05:49 AM
No these are fully installed in a rack. there are four of them and fiber goes out around a plant and back. we need basic configuration for the fiber to create a redundant ring.
03-08-2021 06:22 AM
if you have a basic idea about the switch, you can configure it yourself, below link help you
this is more of a community to help any technical question help to build the config, if you do not have any hands-on experience and you looking only consultant - look as suggest local network engineer who can help(consulting company)
03-08-2021 06:35 AM
Hi,
You may want to call this company. They have 4 locations in Florida including one in Tampa.
https://www.progent.com/Progent-Locations-Local.htm
HTH
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide