Cisco Access Points Rebooting

[Cnote100]

Has anyone experienced a Cisco Access Point reboot itself, on it's own?

[John Blakley]

Sure...which model? POE or power injector?

HTH,
John

*** Please rate all useful posts ***

[Cnote100]

1250's with Power injectors

[John Blakley]

Are all of them rebooting or just one? If it's just one, I would try replacing the power injector. You can see if there's a crash log in flash. If so, you can post it here and we can tell you possibly why it rebooted.

HTH,
John

*** Please rate all useful posts ***

[Cnote100]

7 out of 17 are rebooting... but it's not isolated to one IDF it's different spots within the building.i will check the log in flash.

[Leo Laohoo]

7 out of 17 are rebooting... but it's not isolated to one IDF it's different spots within the building.i will check the log in flash.

Hmmmmm ... And if you do a "sh version" to everyone of them it comes up saying something like "by power-on"?

If this is the case, you may also want to consider the copper cables between your Injector and your AP.