Cisco ASR 1002 - OID for CbQos

[Frederic RIBES]

Hi all,

I would like to get CbQos on a Cisco ASR 1002S (IOS-XE Software (PPC_LINUX_IOSD-IPBASEK9-M), Version 15.1(1)S1).

With the standard OIDs (cbQosIfIndex - 1.3.6.1.4.1.9.9.166.1.1.1.1.4), I can't...

So, is it possible ? If it is, which OID ?

Thanks in advance.

Regards.

[ameya_oke]

HI,

PLease use below commands in ASR.

RTR(config)#configure terminal
RTR(config)#snmp-server ifindex persist
RTR(config)#snmp mib persist cbqos

Below is link for all the OID with CBQos.

http://www.oidview.com/mibs/9/CISCO-CLASS-BASED-QOS-MIB.html

Hope it helps.

Warm Regards

Ameya Oke

[Frederic RIBES]

Thanks for your help Ameya,

Unfortunately for ASR router, the OIDs provided in your link are those I am currently using but the result is :

snmpwalk -v 2c -c SNMP_community IP_adress 1.3.6.1.4.1.9.9.166

SNMPv2-SMI::enterprises.9.9.166 = No more variables left in this MIB View (It is past the end of the MIB tree)

IOS is : IOS-XE Software (PPC_LINUX_IOSD-IPBASEK9-M), Version 15.1(1)S1.

So, is it particular for this kind of IOS to see COS by SNMP on ASR routers ? Is there another diffrent OID with CBQos for this IOS ?

Another idea ?

Thanks in advance.

Best regards.

[Frederic RIBES]

UP

Any idea ?

Thanks.

[Matthias GOUPIL]

Same here.

Did you found how to do?

Thanks