Cisco Catalyst 2960S F48LPSL

[rajneeshkumarthakooree]

Help Please..

Error loading "flash:c2960s-universalk9-mz.152-1.E1/c2960s-universalk9-mz.152-1.E1.bin"

Interrupt within 5 seconds to abort boot process.

Loading "flash:/update/c2960s-universalk9-mz.150-2.SE5/c2960s-universalk9-mz.150-2.SE5.bin"...

Error loading "flash:/update/c2960s-universalk9-mz.150-2.SE5/c2960s-universalk9-mz.150-2.SE5.bin"

Interrupt within 5 seconds to abort boot process.

Boot process failed...

The system is unable to boot automatically.  The BOOT

environment variable needs to be set to a bootable

image.

[acampbell]

Hi,

Looks like your ios image is corrupt

Try following this instruction from the release notes/ config guide

http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst2960/software/release/15-2_1_e/configuration/guide/2960_scg/swtrbl.html#wp1452100

Regards,
Alex.
Please rate useful posts.

[Leo Laohoo]

While in ROMmon, post the output to the command "dir flash:".