Cisco Catalyst 3650 Stack Module

[pritamjitbiswas]

Hi, I have 2 cisco 3650 24ts-s switch i wanted create a stack can any one please tell me the part number on the stack module and Part number on he cable .

[Reza Sharifi · Accepted solution]

Hi,

These switches support stacking and can stack with each other or the existing 3650 switches using the same Cisco StackWise-160 technology. The 3650 mini and 3650 use the same software and thus can be deployed and managed using the same policies, configuration, and so on as the existing 3650 switches. Some use cases for the 3650 mini are the following:

The part number for stack module is:

C3650-STACK-KIT=

and for the cable:

STACK-T2-50CM=

STACK-T2-1M=

See datasheet for more info:

https://www.cisco.com/c/en/us/products/collateral/switches/catalyst-3650-series-switches/data_sheet-c78-729449.html

HTH

[pritamjitbiswas]

thanx for your reply is this module and cable supported in Cisco 3650 24TS-S switch ? 

[Reza Sharifi]

Yes, they are. The switch should already have the stacking module installed. So, you just need the cable.

HTH

[pritamjitbiswas]

Hi,

no sir the switch dose not have module that is why we need to perches the module and cable son could you please confirm me the module part number and cable part number. 

thanx for your help 

[Reza Sharifi]

Yes, that the correct part number for the module and the cable

[pritamjitbiswas]

Hi,

As you know we need to create stack between 2 switch so what is number of module and cable we need to parches ? 

[Deepak Kumar · Accepted solution]

Hi,

As I remember you will require a total of 4 modules and 2 cables.