Cisco Catalyst 4500 NetFlow Services Card
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
12-06-2006 01:00 AM - edited 03-05-2019 01:12 PM
Gentlemen,
I have a core switch (WS-C4507R) with these specifications:
1-IOS: Version 12.1(12c)EW1, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
2-Modules Details
Mod Ports Card Type Model Serial No.
----+-----+--------------------------------------+-----------------+-----------
1 2 1000BaseX (GBIC) Supervisor (active) WS-X4515 JAB07070xxx
3 48 10/100BaseTX (RJ45) WS-X4148-RJ JAE07060xxx
4 6 1000BaseX (GBIC) WS-X4306-GB JAE07050xxx
5 6 1000BaseX (GBIC) WS-X4306-GB JAE07092xxx
3-Supervisor Engine IV (WS-X4515)
And looking to install Netflow services add-on module, so is this module is suitable "WS-F4531(=)" and comply with these specifications?if yes how much it will be ?
Regards,
- Labels:
-
Catalyst 4000
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
12-06-2006 02:09 AM
Hi Friend,
First of all the IOS you are running doesnot support WS-F4531, the netflow services card.Cisco recommeded IOS version for this module is 12.2(25)EWA6.
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat4000/relnotes/ol_5184.htm#wp16938
So you have to upgrade your IOS on the switch. Another point here is that you need an application as well for the netflow statistics to be collected. Please look for that as well.
Its around $3000
HTH, Please rate if it does.
-amit singh
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
12-06-2006 06:41 AM
Hi Amit,
Based on the Data Sheet for the SUP-IV it is required to be 12.1(13)EW
From the DATA SHEET: Supervisor IV with NetFlow Services Card: Cisco IOS Software Release 12.1(13)EW or later.
On the other hand, you mentioned about the software to do a statistics so can you recommend on this software name in order to quote it.
Thank you really I appreciated.
Best Regards,
Rami
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
12-11-2006 12:26 AM
Hi dear,
regarding the software you can select this one:
Cisco CNS NetFlow Collection Engine Version 5.0
http://www.cisco.com/en/US/products/sw/netmgtsw/ps1964/products_data_sheet09186a00801e4ebb.html
Regards,
