09-02-2007 09:02 AM - edited 03-05-2019 06:14 PM
Can we force the Gigabit Ethernet port to be 1000 full duplex in Cisco Catalyst Express 500 series?
09-02-2007 12:22 PM
Hi,
Kindly check this document:
http://www.cisco.com/en/US/products/ps6545/products_user_guide_chapter09186a0080531ea9.html#wp172246
HTH,
Mohammed Mahmoud.
09-27-2010 05:51 PM
Greetings
The CE500 have a CLI Mode, Yes it have! and you can force your interface!
But In my humble opinion I think its a Emulation of the CLI
When you do all the configuration in the SW, just type in you internet explorer.."http:// + IP Swithc + /exec" for example "http://192.168.10.2/exec"
And you can emulate the CLI in the CE500.
04-19-2012 03:39 PM
Hi Jose Quintero...
i try change the configuration the port in the switch catalyst express 500, i need disable switchport port-security, a try with http://10.1.1.1/exec and save configuration with wr command, if a check the configuration de port is correct but i reboot the switch and check the configuration the port appear the switchport port-security configuration again.
do you know solve this??
thk and regards!!!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide